Leave Your Message
SDR-480-24 meanwell SDR series Power Supply Din Rail Switching Power supply LED Driver sdr-480-24

Mean Well

SDR-480-24 meanwell SDR series Power Supply Din Rail Switching Power supply LED Driver sdr-480-24

*High efficiency 94% and low power dissipation.

*150% peak load capability

*Built-in active PFC function, PF>0.94.

*Protections: Short circuit /Overload / Over voltage/Over temperature

*Cooling by free air convection

*Built-in constant current limiting circuit

*Can be installed on DlN rail TS-35/7.5 or 15

*UL 508(industrial control equipment)approved

*BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level

*Built-in DC OK relay contact

*100% full load burn-in test

*3 years warranty

    Product Introduction

    SDR-480.series 480W Single Output Industrial DIN RAlL with PFC Function

    Features

    High efficiency 91% and low power dissipation
    150% peak load capability
    Built-in active PFC function, PF>0.93
    Protections: Short circuit / Overload / Over voltage / Over temperature
    Cooling by free air convection
    Can be installed on DIN rail TS-35/7.5 or 15
    UL 508 (industrial control equipment) approved
    BS EN/EN61000-6-2(EN50082-2) industrial immunity level
    Built-in DC OK relay contact
    100% full load burn-in test
    3 years warranty

    Specification

    MODEL

    SDR-480-24

    SDR-480-48

    OUTPUT

    DC VOLTAGE

    24V

    48V

    RATED CURRENT

    20A

    10A

    CURRENT RANGE

    0~20A

    0~10A

    RATED POWER

    480W

    480W

    PEAK CURRENT

    30A

    15A

    PEAKPOWER

    750W

    RIPPLE & NOISE (max.)

    100mVp-p

    120mVp-P

    VOLTAGE ADJ. RANGE

    24~28V

    48~55V

    VOLTAGE TOLERANCE

    +1.2%

    1.0%

    LINE REGULATION

    0.5%

    0.5%

    LOAD REGULATION

    1.0%

    1.0%

    SETUP, RISE TIME

    1500ms,150ms/230VAC 3000ms,150ms/115VAC at full load

    HOLD UP TIME (TyP.)

    14ms/230VAC at full load

    INPUT

    VOLTAGE RANGE

    90~264VAC 127~370VDC

    FREQUENCY RANGE

    47~63Hz

    POWER FACTOR(Typ.)

    0.94/230VAC  0.99/115VAC at full load

    EFFICIENCY (Typ.)

    94%

    AC CURRENT (TyP.)

    5A/115VAC  2.5AV/230VAC

    INRUSH CURRENT (TyP.)

    40A/115VAC   80A/230VAC

    LEAKAGE CURRENT

    <0.8mA/240VAC

    PROTECTION

    OVERLOAD

    Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery

    >150% rated power, constant curent limiting with auto-recovery within 2 seconds and may cause to shut down if over 2 seconds

    OVER VOLTAGE

    29~33V

    56~65V

    Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery

    OVER TEMPERATURE

    Shut down o/p voltage, recovers automatically after temperature goes down

    ENVIRONMENT

    WORKING TEMP.

    -25~+70℃ (Refer to "Derating Curve")

    WORKING HUMIDITY

    20~95% RH non-condensing

    STORAGE TEMP., HUMIDITY

    -40~+85'℃,10~95% RH

    TEMP. COEFFICIENT

    +0.03%/℃ (0~50℃)

    VIBRATION

    Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y,Z axes;

    SAFETY &

    EMC

    SAFETY STANDARDS

    UL508, TUV BS EN/EN62368-1, ASINZS 62368.1, EAC TP TC 004, BSMI CNS14336-1 approved

    WITHSTAND VOLTAGE

    IP-0/P:3KVAC IIP-FG:2KVAC OIP-FG:0.5KVAC OIP-DC OK:0.5KVAC

    ISOLATION RESISTANCE

    I/P-O/P, I/P-FG, O/P-FG:>100M Ohms/ 500VDC/25C/70% RH

    EMC EMISSION

    Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 CaSS B, BS EN/EN61000-3-2.-3. EAC TP TC 020. CNS13438

    EMC IMMUNITY

    Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55035,BS EN/EN61000-6-2 (BS EN/EN50082-2),BS EN/EN61204-3, heavy industry level, EAC TP TC 020, SEMI F47 approved

    OTHERS

    MTBF

    964.2Khrs min. Telcordia SR-332 (Bellcore) : 91.9K hrs min.MIL-HDBK-217F(25°C)

    DIMENSION

    85.5*125.2*128.5mm(W*H*D)

    PACKING

    1.6Kg: 8pcs/13.8Ka/0.9CUFT

    Customer Feedback

    43

    More Products

    10111
    347
    568
    9122

    Packaging &Shipping

    All products are brand new and intheir original packaging.Provide comprehensive and safe packaging andfast transportation solutions such as DHL, FedEx, small and urgent airfreight, and large sea freight.
    8

    FAQ

    Q: Are you trading company or manufacturer?
    A: Yes, trading company that can give you one-stop station automation purchasing.
    Q: Do you have any stock or need buy from other suppliers?
    A: We saved lots of products for selling. RTS is our advantage, and we have our own warehouse.
    Q: Is there any engineer can help for technical supporting?
    A: Sure, we have. Our technical team can help you for selecting PLC, HMI, Servo motor & drive, VFD, low-voltage products, and software. If you need any help, you can contact our technical department directly. 
    Q: Do you supply 100% original and new products?
    A: Of course . No copy, no fake, no refurbished! Original only!!!
    Q: Do you sell obsolete products or even very old products?
    A: If there is new type to replace, we will suggest you to use new one. If it is not easy for change, we will help to check the old one with good condition. If it is used or other conditions, we will tell you the truth.
    Q: How about Customs Duty & Handling Fee? 
    A: For all customers` orders, we do not charge handing fee, even 1pcs part. When parts arrive at your local custom, if the parts were charged customs duty, we are not responsible for any customs duties or import taxes. 
    Q: How long is your delivery time?
    A: Generally 2-3 working days if the goods in stock. If large quantity, it will take 5-7 working days after getting the payment.
    If not common products, it always takes 3-4 weeks or 6-8 weeks to order.
    Q: Do you have samples? Is it free or extra ?
    A: No. i am sorry, we have no Sample.
    Q: What is your terms of payment ?
    A:TT, WEST UNION and MoneyGram (100% payment in advance if goods in stock; 30% payment in advance, balance before shipping if long delivery)

    description2