Q06UDVCPU mitsubishi Q cpu Module Series MITSUBISHI qo6udvcpu 1160001657 New and Original brand

Type number

Q06UDVCPU

Order Number

1160001657

Brand

Mitsubishi

Place of Origin

Japan

Series

MELSEC-Q SERIES

Type

UNIVERSAL MODEL QCPU

Control method

Stored program cyclic operation

I/O control mode

Refresh mode
(The direct access input/output is available by specifying the direct access input/output (DX, DY).)

Programming language

Programming language

Refresh mode
(The direct access input/output is available by specifying the direct access input/output (DX, DY).)

Processing speed

Sequence instruction

LD X0

1.9 ns

MOV D0 D1

3.9 ns

Constant scan

0.5...2000 ms (setting is available in increments of 0.1 ms by parameter)

Program capacity

60K steps (240K bytes)

Memory capacity

Program memory (drive 0)

240K bytes

Memory card (SD) (drive 2)

Depends on the SD memory card (SD or SDHC type) used. (Max. 32G bytes)

Standard RAM (drive 3)

Without an extended SRAM cassette

768K bytes

With an extended SRAM cassette

Capacities of the memory in the module + extended SRAM cassette
(The maximum capacity of an extended SRAM cassettes is 8M bytes.)

Standard ROM (drive 4)

1025.5K bytes

CPU shared memory

QCPU standard memory

8K bytes

Multiple CPU high speed transmission area

32K bytes

Maximum number of storable files

Program memory

124

Memory card (SD)

SD

Root directory: 512 (maximum)
Subdirectory: 65534 (maximum)

SDHC

Root directory: 65535 (maximum)
Subdirectory: 65534 (maximum)

Standard RAM

323

Standard ROM

256

Maximum number of intelligent function module parameters

Initial setting

4096 parameters

Refresh

2048 parameters

Number of I/O device points

8192 points (X/Y0...1FFF)

Number of I/O points

4096 points (X/Y0...FFF)

No. of device points

Internal relay (M)

15360 points (M0...15359) by default (changeable)

Latch relay (L)

8192 points (L0...8191) by default (changeable)

Link relay (B)

8192 points (B0...1FFF) by default (changeable)

Timer (T)

2048 points (T0...2047) by default (changeable) (Low-speed and high-speed timers available)
Low-speed or high-speed is specified by an instruction.
The measurement unit is set by parameter.
(Low-speed timer: 1...1000 ms (in increments of 1 ms), default: 100 ms)
(High-speed timer: 0.01...100 ms (in increments of 0.01 ms), default: 10.0 ms)

Retentive timer (ST)

0 points by default (changeable) (Low-speed and high-speed retentive timers available)
Low-speed or high-speed is specified by an instruction.
The measurement unit is set by parameter.
(Low-speed retentive timer: 1...1000 ms (in increments of 1 ms), default: 100 ms)
(High-speed retentive timer: 0.01...100 ms (in increments of 0.01 ms), default: 10.0 ms)

Counter (C)

Normal counter: 1024 points (C0...1023) by default (changeable)

Data register (D)

22528 points (D0...22527) by default (changeable)

Extended data register (D)

0 points by default (changeable)

Link register (W)

8192 points (W0...1FFF) by default (changeable)

Extended link register (W)

0 points by default (changeable)

Annunciator (F)

2048 points (F0...2047) by default (changeable)

Edge relay (V)

2048 points (V0...2047) by default (changeable)

File register (R)

Without an extended SRAM cassette

32768 points (R0...32767) (Maximum 393216 points are available by switching blocks.)

With Q4MCA-1MBS

32768 points (R0...32767) (Maximum 917504 points are available by switching blocks.)

With Q4MCA-2MBS

32768 points (R0...32767) (Maximum 1441792 points are available by switching blocks.)

With Q4MCA-4MBS

32768 points (R0...32767) (Maximum 2490368 points are available by switching blocks.)

With Q4MCA-8MBS

32768 points (R0...32767) (Maximum 4587520 points are available by switching blocks.)

File register (ZR)

Without an extended SRAM cassette

393216 points (ZR0...393215) (Blocks do not need to be switched.)

With Q4MCA-1MBS

917504 points (ZR0...917503) (Blocks do not need to be switched.)

With Q4MCA-2MBS

1441792 points (ZR0...1441791) (Blocks do not need to be switched.)

With Q4MCA-4MBS

2490368 points (ZR0...2490367) (Blocks do not need to be switched.)

With Q4MCA-8MBS

4587520 points (ZR0...4587519) (Blocks do not need to be switched.)

Link special relay (SB)

2048 points (SB0...7FF) by default (changeable)

Link special register (SW)

2048 points (SW0...7FF) by default (changeable)

Step relay (S)

8192 points (S0...8191) by default (changeable)

Index register/standard device register (Z)

20 points (Z0...19) (maximum)

Index register (Z) (32-bit index modification of ZR device)

10 points (Z0...18) (maximum) (The index register is used as a double-word device.)

Pointer (P)

4096 points (P0...4095) (The number of device points is fixed.) (The local pointer range and the common pointer range can be set by parameter.)

Interrupt pointer (I)

256 points (I0...255) (The number of device points is fixed.)
(The fixed scan interval for the system interrupt pointer I28 to 31 can be set by parameter.)
0.5...1000.0 ms (in increments of 0.5 ms)
Default I28: 100 ms, I29: 40 ms, I30: 20 ms, I31: 10 ms

Special relay (SM)

2048 points (SM0...2047) (The number of device points is fixed.)

Special register (SD)

2048 points (SD0...2047) (The number of device points is fixed.)

Function input (FX)

16 points (FX0...F) (The number of device points is fixed.)

Function output (FY)

16 points (FY0...F) (The number of device points is fixed.)

Function register (FD)

5 points (FD0...4) (The number of device points is fixed.)

Allowable momentary power failure time

The time differs depending on the power supply module used.

Internal current consumption (5 V DC)

0.58 A (only CPU module), 0.6 A (with an extended SRAM cassette)

External dimensions

Heigh

98mm

Width

27.4mm

Depth

115mm

Weight

0.2kg

Transmission specifications

Data transmission speed

100/10 Mbps

Communication mode

Full-duplex/Half-duplex

Transmission method

Base band

Maximum distance between hub and node

100 m

Number of connections

Total of 16 for Socket communications, MELSOFT connections, and MC protocols.
1 for FTP.