Eaton

*Motor protection relay, 6 - 9 A, 1 NO + 1 NC

*Overload relay; 6-9 A; 1 NO + 1 NC; Direct mounting in DILE.. M

*Eaton Moeller® series ZE Motor Protection Relay, Ir= 6 - 9 A, 1 S, Direct Mounting

*Eaton Moeller® series ZE Overload relay, Ir= 4 - 6 A, 1 N/O, 1 N/C, Direct mounting

*Overload relay, 2.4-4A, 1N/O+1N/C

*Overload relay; 2.4-4 A; 1 NO + 1 NC; Direct assembly in DILE.. M

*Eaton Moeller® series ZE Overload relay, Ir= 2.4 - 4 A, 1 N/O, 1 N/C, Direct mounting

*Overload relay, Product range: ZE overload relays for mini contactor relays, Phase-failure sensitivity: IEC/EN 60947, VDE 0660 Part 102, Description: Test/off button, Reset pushbutton manual/auto, Trip-free release, Mounting type: Direct mounting, Auxiliary contacts N/O = Normally open: 1 N/O, Auxiliary contacts N/C = Normally closed: 1 N/C, For use with: DILEM, DIULEM/21/MV, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP20

*Eaton Moeller® series ZE Overload relay, Ir= 1 - 1.6 A, 1 N/O, 1 N/C, Direct mounting

*Eaton PDC molded case circuit breaker, PDK1-A100

*Door coupling rotary handle, lockable, size 3

*NZM3-XTVD

*Eaton Moeller series NZM - Molded Case Circuit Breaker. Door coupling rotary handle, lockable, size 3

*Optional accessories for circuit-breaker series NZM offers a comprehensive portfolio of application possibilities for worldwide use. Modular functional groups make mounting flexible and simple. Note: Complete including rotary drive and coupling parts. External warning plate/designation label can be clipped on. Standard, black/grey. Lockable in 0 position on the handle using up to 3 padlocks. With door interlock. Can be used with: NZM3(-4), PN3(-4), N(S)3(-4)

*Eaton molded case circuit breaker accessory handle mechanism, Door coupling rotary handle, Suitable for switch-disconnector, power circuit breaker, lockable: single, NZM4, Frame J-K, Series NZM, Black

*Remote operator, 208-240VAC, for size 3

*NZM3-XR208-240AC

*Eaton Moeller series NZM - Molded Case Circuit Breaker. Remote operator, 208-240VAC, for size 3

*Optional accessories for the circuit-breaker series NZM offers a comprehensive portfolio of application options for use world wide. The mounting is always flexible and easy thanks to the modular function groups. Notes: for remote switching of circuit-breakers and switch-disconnectors. ON and OFF switching and resetting by means of two-wire or three-wire control. Local switching by hand possible. lockable in the 0 position of the remote operator with up to 3 padlocks (hasp thickness: 4–8mm). Can be synchronized. Cannot be combined with mechanical interlock. Cannot be combined with dual auxiliary switch M22-CK11 . Can be used for: NZM3(-4), N(N/O)3(-4)

*Auxiliary contact, 2early N/O, operates as an early-make contact, 3m cable

*NZM1-XHIVL

*Optional accessories for the circuit-breaker series NZM offers a comprehensive portfolio of application options for use world wide. The mounting is always flexible and easy thanks to the modular function groups. Notes: for interlocking and load shedding circuits, as well as for early make of the under voltage release in main switch / emergency switching off applications. Not in conjunction with NZM…-XU… under voltage release or NZM…-XA… shunt release early make with switch on and switch off (manual actuation): approx. 20ms. With 3 m connection cable instead of screw connection. Can be used for: NZM1(-4), PN1(-4), N(N/O)1(-4)

*Earth-fault release, 30mA, 3p, right

*NZM1-XFI30R

*Optional accessories for the circuit-breaker series NZM offers a comprehensive portfolio of application options for use world wide. The mounting is always flexible and easy thanks to the modular function groups. Notes: approved according to IEC/EN 60947-2 not UL/CSA approved. Suitable for use in three- and single-phase systems. Pulse current sensitive according to core-balance principle. For 3 and 4 pole NZM1(-4) circuit-breakers and switch-disconnectors N1(-4).mains voltage independent Ue = 200 .. 415 V 50/60 Hz. At I △n = 0.03 A: delay time t v always fixed setting to 10 ms. Warning message > 30 % I △n by yellow LED . Trip indication max. 2 auxiliary contacts (HIAFI) can be fitted by user: N/O = M22-K01, N/C = M22-K10 are reset via the reset button. If the trip-indicating auxiliary contact in the fault current block is used, the N/C contacts operates as a N/O contact and the N/C contact operates as an N/O contact. Double contact not permissible. Not in combination with insulated enclosure or main switch assembly kit for side panel mounting with mounting bracket. NZM1-XFI...R can not be used in combination with lower cover NZM1-XUSA.NZM1-XFI…U not in combination with shunt or under voltage release, early-make auxiliary contacts . Rated ultimate short-circuit breaking capacity is determined by fitted NZM1, NS1. When using a switch-disconnector N1, by the back-up fuse to be used. See technical data. Can be used for: NZM1, N(S)1

*Label, emergency switching off, yellow, D=90mm, 4 languages, DE, EN, FR, IT M22-XAK1

*Eaton Moeller® series M22 Label, emergency switching off, yellow, D=90mm, 4 languages, DE, EN, FR, IT

*Emergency-Stop label, Product range: Accessories, yellow, Connection to Smart Wire-DT: no

*Eaton Moeller® series M22 Emergency stop/emergency switching off pushbutton, RMQ-Titan, Mushroom-shaped, 38 mm, Non-illuminated, Turn-to-release function, Red, yellow, RAL 3000