RST-5000-24 meanwell RST series 5000W Power Supply Switching Power Supply with Single Output MW rst-5000-24

MODEL

RST-5000-24

RST-5000-36

RST-5000-48

OUTPUT

DC VOLTAGE

24V

36V

48V

RATED CURRENT

200A

138A

105A

CURRENT RANGE

0~200A

0~138A

0~105A

RATED POWER

4800W

4968W

5040W

RIPPLE & NOISE (max.)

150mVp-p

200mVp-p

200mVp-p

VOLTAGE ADJ. RANGE

23.5~28.8V

35~43.2V

47~57.6V

Can be adjusted via built-in potentiometer

VOLTAGE TOLERANCE

+1.0%

士1.0%

士1.0%

LINE REGULATION

士0.5%

士0.5%

士0.5%

LOAD REGULATION

士0.5%

士0.5%

士0.5%

SETUP, RISE TIME

2200ms, 80ms at full load

HOLD UP TIME (TyP.)

20ms/230VAC at 75% load

14ms / 230VAC at full load

INPUT

VOLTAGE RANGE

3y 3-wire/^196~305VAC 

or3y 4-wire/Y340~530VAC

FREQUENCY RANGE

47~63Hz

POWER FACTOR (Typ.)

0.951230VAC(400VAC) at full load

EFFICIENCY (Typ.)

88.5%

89.5%

90.5%

AC CURRENT (TyP.)

15A230VAC(3y 3-wire/^)

9A1400VAC(3 y 4-wire/Y)

INRUSH CURRENT (TyP.)

75A230VAC(3y 3-wire/^)

50A1400VAC(3 y 4-wire/Y)

LEAKAGE CURRENT

<3.5mA/  ^305VAC(Y 530VAC)

PROTECTION

OVERLOAD

100~112% rated output power

User adjustable continuous constant current limiting or constant current limiting with delay shutdown after 5 seconds, re-power on to recover

OVER VOLTAGE

30~33.6V

45~50.4V

60~67.2V

Protection type : Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

REMOTE SENSE

Compensate voltage drop on the load wiring up to 0.3V. Please refer to the Function Manual.

CURRENT SHARING

Up to 20000W or (3+1) units. Please refer to the Function Manual.

OUTPUTVOLTAGE PROGRAMABLE

Adjustment of output voltage is allowable to between 20~ 120% of nominal output voltage. Please refer to the Function Manual

CONSTANT CURRENT LEVEL PROGRAMMABLE

Adjustment of constant current level is allowable to between 20 ~ 100% of rated current, Please refer to the Function Manual.

AUXILIARY POWER(AUX)

12V@0.1A(0nly for Remote ON-OFF control)

REMOTE ON-OFF CONTROL

Please refer to the Function Manual.

ALARM SIGNAL OUTPUT

AC fail, DC OK, fan fail, OTP. Please refer to the Function Manual.

ENVIRONMENT

WORKING TEMP.

-30~+70℃ (Refer to "Derating Curve")

WORKING HUMIDITY

20~90% RH non-condensing

STORAGE TEMP., HUMIDITY

-40~+85℃,10~95% RH non-condensing

TEMP. COEFFICIENT

+0.03%/℃ (0~50℃)

VIBRATION

10~500Hz,2G 10min./1cycle, 60min. each along X, Y, Z axes

OTHERS

MTBF

293.3Khrs min.

Telcordia SR-332 (Bellcore);34.7Khrs min.  

MIL-HDBK-217F(25°C)

DIMENSION

460*211*83.5mm (L*W*H)

PACKING

10Kg:1pcs/10.1Kg/0.85CUFT