Products

*Eaton Moeller® series ZE Overload relay, Ir= 4 - 6 A, 1 N/O, 1 N/C, Direct mounting

*Overload relay, 2.4-4A, 1N/O+1N/C

*Overload relay; 2.4-4 A; 1 NO + 1 NC; Direct assembly in DILE.. M

*Eaton Moeller® series ZE Overload relay, Ir= 2.4 - 4 A, 1 N/O, 1 N/C, Direct mounting

*Overload relay, Product range: ZE overload relays for mini contactor relays, Phase-failure sensitivity: IEC/EN 60947, VDE 0660 Part 102, Description: Test/off button, Reset pushbutton manual/auto, Trip-free release, Mounting type: Direct mounting, Auxiliary contacts N/O = Normally open: 1 N/O, Auxiliary contacts N/C = Normally closed: 1 N/C, For use with: DILEM, DIULEM/21/MV, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP20

*Eaton Moeller® series ZE Overload relay, Ir= 1 - 1.6 A, 1 N/O, 1 N/C, Direct mounting

*Eaton PDC molded case circuit breaker, PDK1-A100

*Door coupling rotary handle, lockable, size 3

*NZM3-XTVD

*Eaton Moeller series NZM - Molded Case Circuit Breaker. Door coupling rotary handle, lockable, size 3

*Optional accessories for circuit-breaker series NZM offers a comprehensive portfolio of application possibilities for worldwide use. Modular functional groups make mounting flexible and simple. Note: Complete including rotary drive and coupling parts. External warning plate/designation label can be clipped on. Standard, black/grey. Lockable in 0 position on the handle using up to 3 padlocks. With door interlock. Can be used with: NZM3(-4), PN3(-4), N(S)3(-4)

*Eaton molded case circuit breaker accessory handle mechanism, Door coupling rotary handle, Suitable for switch-disconnector, power circuit breaker, lockable: single, NZM4, Frame J-K, Series NZM, Black

*Remote operator, 208-240VAC, for size 3

*NZM3-XR208-240AC

*Eaton Moeller series NZM - Molded Case Circuit Breaker. Remote operator, 208-240VAC, for size 3

*Optional accessories for the circuit-breaker series NZM offers a comprehensive portfolio of application options for use world wide. The mounting is always flexible and easy thanks to the modular function groups. Notes: for remote switching of circuit-breakers and switch-disconnectors. ON and OFF switching and resetting by means of two-wire or three-wire control. Local switching by hand possible. lockable in the 0 position of the remote operator with up to 3 padlocks (hasp thickness: 4–8mm). Can be synchronized. Cannot be combined with mechanical interlock. Cannot be combined with dual auxiliary switch M22-CK11 . Can be used for: NZM3(-4), N(N/O)3(-4)

*Auxiliary contact, 2early N/O, operates as an early-make contact, 3m cable

*NZM1-XHIVL

*Optional accessories for the circuit-breaker series NZM offers a comprehensive portfolio of application options for use world wide. The mounting is always flexible and easy thanks to the modular function groups. Notes: for interlocking and load shedding circuits, as well as for early make of the under voltage release in main switch / emergency switching off applications. Not in conjunction with NZM…-XU… under voltage release or NZM…-XA… shunt release early make with switch on and switch off (manual actuation): approx. 20ms. With 3 m connection cable instead of screw connection. Can be used for: NZM1(-4), PN1(-4), N(N/O)1(-4)

*Earth-fault release, 30mA, 3p, right

*NZM1-XFI30R

*Optional accessories for the circuit-breaker series NZM offers a comprehensive portfolio of application options for use world wide. The mounting is always flexible and easy thanks to the modular function groups. Notes: approved according to IEC/EN 60947-2 not UL/CSA approved. Suitable for use in three- and single-phase systems. Pulse current sensitive according to core-balance principle. For 3 and 4 pole NZM1(-4) circuit-breakers and switch-disconnectors N1(-4).mains voltage independent Ue = 200 .. 415 V 50/60 Hz. At I △n = 0.03 A: delay time t v always fixed setting to 10 ms. Warning message > 30 % I △n by yellow LED . Trip indication max. 2 auxiliary contacts (HIAFI) can be fitted by user: N/O = M22-K01, N/C = M22-K10 are reset via the reset button. If the trip-indicating auxiliary contact in the fault current block is used, the N/C contacts operates as a N/O contact and the N/C contact operates as an N/O contact. Double contact not permissible. Not in combination with insulated enclosure or main switch assembly kit for side panel mounting with mounting bracket. NZM1-XFI...R can not be used in combination with lower cover NZM1-XUSA.NZM1-XFI…U not in combination with shunt or under voltage release, early-make auxiliary contacts . Rated ultimate short-circuit breaking capacity is determined by fitted NZM1, NS1. When using a switch-disconnector N1, by the back-up fuse to be used. See technical data. Can be used for: NZM1, N(S)1

*Label, emergency switching off, yellow, D=90mm, 4 languages, DE, EN, FR, IT M22-XAK1

*Eaton Moeller® series M22 Label, emergency switching off, yellow, D=90mm, 4 languages, DE, EN, FR, IT

*Emergency-Stop label, Product range: Accessories, yellow, Connection to Smart Wire-DT: no

*Eaton Moeller® series M22 Emergency stop/emergency switching off pushbutton, RMQ-Titan, Mushroom-shaped, 38 mm, Non-illuminated, Turn-to-release function, Red, yellow, RAL 3000

*Switch Contact Blocks / Switch Kits CONTACT BLOCK 1NO SCREW TERM

*M22 Switch Contact Blocks

*Eaton Electrical M22 Switch Contact Blocks/Switch Kits are non-illuminated emergency stop contact blocks. These contact blocks feature IP20, IP66, NEMA 4X, and 13 environmental ratings. The M22 switch contact blocks are ideal to use with 22.5mm pushbutton switches. These contact blocks are compliant with GoST-R, CE marked, and Bureau Veritas.