01
LC1D09B7C schneider TeSys D series AC contactor LC1-D09B7C Contactor 24V coil 3P 3NO 9A new and 100% original
Product Introduction
LC1D09B7C schneider TeSys D series AC contactor LC1-D09B7C Contactor 24V coil 3P 3NO 9A new and 100% original
Features
LC1D09B7C Schneider TeSys Deca contactor LC1D09B7C, 3P, 9A, AC-3 4kW 400V, 1NO+1NC aux contact, 24V 50/60Hz AC coil, auxiliary contacts can be used in safety loops (mirror contacts), Certification (IEC, CCC, CCS, RoHS, REACH).
Specification
| Type | LC1D09B7C |
|---|---|
| Order Number | LC1D09B7C |
| Brand | Schneider |
| Place of Origin | France |
| Product Series | TeSys Deca |
| Product type | contactor |
| Product short name | LC1D |
| Contactor application field |
Applied to AC loads with power factor greater than or equal to 0.95
Applied to non inductive or micro inductive load, resistance furnace
|
| number of poles | 3 |
| Loop contact type | 3 NO |
| protective cap | Yes |
| Auxiliary contacts available on each contactor | 1 NO + 1 NC |
| Signal loop frequency | 25...400 Hz |
| Height | 77 mm |
| Width | 45 mm |
| Depth | 86mm |
| Net Weight | 0.32kg |
| Rated operating voltage [Ue] |
Power supply circuit: <= 690 V AC 25... 400 Hz
Power supply circuit: <= 225 V DC
|
| Rated operating current [Ie] | 25 A (when operating temperature <=60 °C) When operating voltage <=<= 440 V AC AC-1 for the power supply circuit
9 A (when operating temperature <=60 °C) When operating voltage <=<= 440 V AC AC-3 for power supply circuit
9 A (when operating temperature <=60 °C) When operating voltage <=<= 440 V AC AC-3E for power supply circuit
|
| Control loop voltage [Uc] | 24 V AC 50/60 Hz |
| Rated operating current [Ie] | 5.5kW When operating voltage <=500 V AC 50/60 Hz (AC-3)
2.2kW When operating voltage <=220/240 V AC 50/60 Hz (AC-3)
4 kW When operating voltage <=380/400 V AC 50/60 Hz (AC-3)
4 kW when operating voltage <=415/440 V AC 50/60 Hz (AC-3)
5.5kW When operating voltage <=660/690 V AC 50/60 Hz (AC-3)
2.2kW When operating voltage <=400 V AC 50/60 Hz (AC-4)
5.5kW When operating voltage <=500 V AC 50/60 Hz (AC-3E)
2.2kW When operating voltage <=220/240 V AC 50/60 Hz (AC-3E)
4 kW When operating voltage <=380/400 V AC 50/60 Hz (AC-3E)
4 kW when operating voltage <=415/440 V AC 50/60 Hz (AC-3E)
5.5kW When operating voltage <=660/690 V AC 50/60 Hz (AC-3E)
|
| type | LC1D |
| Conventional heating current [Ith] | 25 A (when operating temperature <=60 °C) for the power supply circuit
10 A (when operating temperature <=60 °C) for signal loop
|
| Overvoltage class | III |
| mechanical life | 15 Mcycles |
| Minimum switching current [Imin] | 5 mA for signal loop |
| Minimum switching voltage | 17 V for signal loop |
| insulation resistance | > 10 MΩ for signal loop |
| way to install |
Rail mounting
Base mounting
|
| warranty bill | 18 months |
Customer Feedback
More Products
Packaging &Shipping
All products are brand new and intheir original packaging.Provide comprehensive and safe packaging andfast transportation solutions such as DHL, FedEx, small and urgent airfreight, and large sea freight.
FAQ
Q: Are you trading company or manufacturer?
A: Yes, trading company that can give you one-stop station automation purchasing.
Q: Do you have any stock or need buy from other suppliers?
A: We saved lots of products for selling. RTS is our advantage, and we have our own warehouse.
Q: Is there any engineer can help for technical supporting?
A: Sure, we have. Our technical team can help you for selecting PLC, HMI, Servo motor & drive, VFD, low-voltage products, and software. If you need any help, you can contact our technical department directly.
Q: Do you supply 100% original and new products?
A: Of course . No copy, no fake, no refurbished! Original only!!!
Q: Do you sell obsolete products or even very old products?
A: If there is new type to replace, we will suggest you to use new one. If it is not easy for change, we will help to check the old one with good condition. If it is used or other conditions, we will tell you the truth.
Q: How about Customs Duty & Handling Fee?
A: For all customers` orders, we do not charge handing fee, even 1pcs part. When parts arrive at your local custom, if the parts were charged customs duty, we are not responsible for any customs duties or import taxes.
Q: How long is your delivery time?
A: Generally 2-3 working days if the goods in stock. If large quantity, it will take 5-7 working days after getting the payment.
If not common products, it always takes 3-4 weeks or 6-8 weeks to order.
Q: Do you have samples? Is it free or extra ?
A: No. i am sorry, we have no Sample.
Q: What is your terms of payment ?
A:TT, WEST UNION and MoneyGram (100% payment in advance if goods in stock; 30% payment in advance, balance before shipping if long delivery)
description2